casting and flipping
 

delete this thread

Twin Bugaboos . . . And One More
 

Casting is the premature Uncocking (a Perpendicular Motion) of the Left Wrist from the Top of the Stroke. It Triggers an early Release, lengthens the Clubshaft-Left Arm Radius and, after an initial Over-Acceleration, results in a tremendous Power loss through Impact.

Flipping is the Bending (a Horizontal Motion) of the Left Wrist through Impact. It causes the Clubshaft to lose its In-Line condition with the Left Arm and, unless Impact occurs prior to the Bending, results in a loss of Power (Clubhead MPH and Effective Mass) and Rhythm (Primary Lever Assembly RPM).

Throwaway is the loss of Power and Accuracy that results from the above sequential mutual aid society.

:)

could both casting and flipping be caused by the same thing?

Could I be doing both during my swing?

I am losing distance and can not figure why.

It has to be one of these or both.

Casting Couch
 

Q: could both casting and flipping be caused by the same thing?

A: Yes . . . Uneducated Hands.

Could I be doing both during my swing?

Yes . . . Probably.

I am losing distance and can not figure why.

Low Lag Pressure (Acceleration Rate); large Release Interval (Full Sweep Release); and poor Impact Alignments.

It has to be one of these or both.

Casting and Flipping combine as Throwaway. The cure will be to learn to correctly Accumulate, Load, Store, Deliver and Release Power.

:golfcart2:

Great info....I just receieved my 7th edition Golf Machine Book so that makes good sense....Thanks...

I need some definitions:Low lag pressure- does this mean my acceleration rate is to slow or to fast?
Large release interval--
Poor Impact alignments-- I assume is the result of all this.

School Work Without School Book
 

Jerry,

Do you own the book?

:)

yes I do, I quess I will do some more reading. Sorry, but I do have hard time reading and understanding that yellow thing.